Print Settings & Certificates
| Material Type | Hot-End | Bed | Max Volumetric Speed | Notes | Tech Data | TDS |
|---|---|---|---|---|---|---|
| ABS | 230-250℃ | 80-100℃ | 10-12(mm³/s） | Use gloves with Fiber filaments | - | ABS TDS |
| ASA | 230-250℃ | 80-100℃ | 9-12(mm³/s） | - | - | ASA TDS |
| PETG | 220-240℃ | 40-60℃ | 10-12(mm³/s） | - | - | PETG TDS |
| PA | 230-250℃ | 80-100℃ | 9-12(mm³/s） | - | Active Drying Is Recommended | PA6 TDS |
| PVA | 220 - 250 °C | 35 - 45 °C | - | Must dry well before use | Active Drying Is Recommended | - |
| TPU-95A | 220-240℃ | 40-60℃ | 3-6(mm³/s） | Must dry well before use | - | TPU-95A TDS |
| PC | 260-280℃ | 90-100℃ | 8-12(mm³/s） | - | Active Drying Is Recommended | PC TDS |
| PA6-CF | 230-270℃ | 80-100℃ | 8-12(mm³/s） | Use gloves with Fiber filaments | PA6-CF TDS | |
| PC-CF | 270-285℃ | 90-100℃ | 8-12(mm³/s） | Use gloves with Fiber filaments | - | |
| ABS-CF | 220-245℃ | 80-100℃ | 10-12(mm³/s） | Use gloves with Fiber filaments | - |